基于变量集结预测控制的四旋翼无人机控制器设计

针对四旋翼无人机路径跟踪问题，设计了一种基于变量集结预测控制的控制器。首先以四旋翼无人机状态空间模型为基础建立预测模型；接着设计控制器时采用分段集结的策略把控制量集结成三段优化序列以减少优化计算量，并降低优化保守性，为了进一步加强系统稳定性，控制器引入终端代价函数和终端约束；最后用四旋翼无人机的动力学模型作为被控对象进行仿真验证，结果表明：该控制器能使四旋翼无人机在三轴方向均能实现一个良好的路径跟踪效果。与传统方法相比，这种基于变量集结的预测控制策略能够减小在线优化量，更适合四旋翼无人机飞控芯片的应用。     

多飞行器动态目标追踪协同控制研究

多飞行器追踪动态目标是一个协同控制问题,需要根据目标飞行状态,协同各个追踪飞行器的飞行状态,最终能够在某动态的最佳点实现同时到达。考虑到目标具有较强的机动性,轨迹通常为非线性的,设计了一种基于非线性轨迹预测的、以剩余时间为控制变量的一致性控制方案。仿真结果表明,提出的控制方案能够实现空间位置相距较远的多飞行器动态追踪,具有较好的灵活性和收敛性,目标轨迹的预测结果与实际轨迹误差较小,恰当的轨迹估计有助于缩短追踪时间,提高追踪效率。     

火星大气进入段抗饱和固定时间阻力加速度跟踪制导律设计

研究了具有固定时间收敛特性的火星探测器大气进入段的标称轨迹跟踪制导问题。首先，针对横向运动，给出与速度成线性关系的航向误差漏斗走廊形式，完成了倾侧角的反号逻辑设计。与横程漏斗走廊反号逻辑相比，该逻辑计算量小，更适用于宇航计算机。与航向误差宽度走廊反号逻辑相比，该逻辑在高速状态下能够避免倾侧角的频繁切换，可提高任务成功的概率。其次，针对纵向运动，通过RBF神经网络补偿了倾侧角饱和问题，利用积分滑模设计了阻力加速度固定时间饱和跟踪制导律，其不仅可有效消除滑模控制的抖振问题，且将跟踪误差以两种不同形式引入制导律，能够加速收敛，能够保证跟踪误差在固定时间内快速收敛至0。最后，通过数值仿真验证了所设计的横向倾侧角切换逻辑和纵向制导律对标称轨迹的快速、精确跟踪能力。     

某型飞机阻力伞抛放系统故障模式分析

针对某型飞机阻力伞系统放伞、抛伞故障,通过分析系统的组成、工作原理、常见故障模式以及故障原因,提出了改进建议,为该型飞机阻力伞抛放系统故障的排除提供思路。     

Real-time object tracking via least squares transformation in spatial and Fourier domains for unmanned aerial vehicles

This paper addresses the problem of real-time object tracking for unmanned aerial vehicles. We consider the task of object tracking as a classification problem. Training a good classifier always needs a huge number of samples, which is always time-consuming and not suitable for realtime applications. In this paper, we transform the large-scale least-squares problem in the spatial domain to a series of small-scale least-squares problems with constraints in the Fourier domain using the correlation filter technique. Then, this problem is efficiently solved by two stages. In the first stage, a fast method based on recursive least squares is used to solve the correlation filter problem without constraints in the Fourier domain. In the second stage, a weight matrix is constructed to prune the solution attained in the first stage to approach the constraints in the spatial domain. Then, the pruned classifier is used for tracking. To evaluate proposed tracker's performance, comprehensive experiments are conducted on challenging aerial sequences in the UAV123 dataset. Experimental results demonstrate that proposed approach achieves a state-ofthe-art tracking performance in aerial sequences and operates at a mean speed of beyond 40 frames/s. For further analysis of proposed tracker's robustness, extensive experiments are also performed on recent benchmarks OTB50, OTB100, and VOT2016.     

基于NHDO的机动目标拦截攻击角度约束导引律

为了精确控制导弹在有限时间内以期望攻击角度拦截机动目标,采用将导弹自动驾驶仪简化为惯性环节的方法,结合终端滑模控制理论设计了一种带攻击角度约束的有限时间收敛制导律。为了滤除视线角速率噪声,提出一种非线性跟踪微分滤波器对噪声进行滤波,建立了考虑滤波的制导系统状态方程,基于此方程设计非齐次干扰观测器,用于目标机动不确定项的估计补偿。仿真结果表明,所设计的制导律能达到对视线角速率有效滤波,对目标机动状态精确估计的目的,克服系统动态延迟对制导精度的不利影响,满足攻击角度和制导精度的双重要求。     

大型平台的惯性稳定与地理坐标系姿态跟踪

介绍了一种大型两轴稳定平台的惯性稳定和地理系姿态跟踪原理,建立了稳定平台俯仰框架和横滚框架的运动学模型和动力学模型,进行了稳定平台横滚通道的角速度回路和角位置回路设计,仿真分析了姿态角测量误差作用下的稳定平台姿态跟踪性能,与利用加速度计反馈实现调平的两轴阻尼稳定平台进行对比,比对结果验证了本文设计的控制系统在水平姿态跟踪速度和抗干扰能力上的优势.平台样机进行了姿态跟踪测试,结果验证了结合定位定向系统(POS)的稳定平台惯性稳定和姿态跟踪控制方法可行.     

Laminar flow control research at TsAGI: Past and present

This paper presents a brief review of activities in laminar flow control being performed at the Central Aerohydrodynamic Institute named after Prof. N.E. Zhukovsky (TsAGI). These efforts are focused on the improvement of the existing laminar flow control methods and on the development of new ones. The investigations have demonstrated the effectiveness of aircraft surface laminarization applications with the aim of friction drag reduction. The opportunity of considerable delaying of laminar-turbulent transition due to special wing profile geometry and using boundary layer suction and surface cooling has been verified at sub- and supersonic speeds through various wind tunnel testing at TsAGI and during flying laboratory experiments at the Flight Research Institute (LII). The investigations on using hybrid laminar flow control systems for friction drag reduction were also carried out. New techniques of laminar flow control were proposed, in particular, the method of local heating of the wing leading edge, boundary layer laminarization by means of receptivity control, and electrohydrodynamic methods of boundary layer stability control.     

基于MSP430点光源跟踪系统设计

提出了一种基于MSP430的点光源跟踪的具体设计方案,并对设计方案的硬件组成、程序设计、调试进行了介绍,实验证明,所设计的光源自跟踪系统有较强的适应能力,反应迅速,灵活性大。     

飞机大部件自动对接同步调姿方法

提出了飞机大部件自动对接同步调姿方法,实现了大部件调姿基准点的连续自动跟踪测量和位姿连续调整.在此基础上开发了集测量场构建、大部件位姿解算和调整等功能于一体的大部件自动对接集成控制软件,并在ARJ21飞机翼身自动对接现场进行了应用试验,结果证明该方法能有效完成飞机翼身自动对接过程,提高测量和对接效率.